Order Online

  Product Information

All About Mirka Abranet Sanding Discs

Click here to order Mirka Abranet abrasives

Dust-free sanding at last!

Abranet™ is a revolutionary product for paint and body shops. The new patented sanding disc has amazing properties, which will fundamentally change your work environment and how you work.

The main benefits offered by Abranet are: • Dust-free sanding • Greater efficiency • Better sanding • Elimination of pilling problems • Improved topcoat • Less use of materials • Better work environment • Less environmental impact Abranet consists of a flat, reticular disc with thousands of holes. The distance from each piece of grit to the dust extraction point is only half a millimeter – which gives tremendous extraction capacity.

Virtually Dust-Free Effective Sanding

Abranet™ is a new dust-free abrasive for the sanding of primer and topcoat. The sanding disc has a new patented design, which improves your work environment as well as your sanding. It will improve productivity and the final finish providing an effective procedure.

Innovative design

The secret behind Abranet is a small reticular disc with
thousands of small holes. The distance from each piece of grit to the nearest dust collection point is only half a millimeter. This gives you efficient dust extraction from the entire surface of the disc.

Dust-free

Abranet’s innovative design brings you many additional benefits. Thanks to the fantastic extraction effect, sanding is dust-free.

Better sanding

Sanding also turns out better compared with the use of traditional abrasives. Since the dust is immediately extracted from the disc, the formation of “pills” is avoided. Pilling can lead to defects in the sanding surface which show up in the subsequent coating. Abranet also solves the problem of caking, which reduces the abrasiveness of the disc.

Faster sanding

The Abranet disc has a much longer lifetime and retains its original sanding performance much longer than traditional abrasives. This means that sanding can be carried out more quickly and more effectively.

Better work environment

Dust-free sanding radically reduces the risk of the topcoat being spoilt by circulating grains of dust. It also brings a very big improvement in your work environment.

Low investment costs

Despite Abranet’s revolutionary properties, the system requires no expensive investments on the part of the user. All that is needed is a new super-efficient backing pad with nineteen holes, which Mirka has developed specially for the new product. Otherwise Abranet can be used with the existing dust collection system.

Abranet requires no costly additional investments.
All that is needed is a new, specially designed
backing pad, which can be used with traditional
discs with the majority of hole combinations.

Traditional Sanding Disc		Mirka Abranet Sanding Disc
	Problems with dust Circulating dust results in a poorer work environment and contaminated topcoat.		Dust-free With Abranet, all the dust is extracted immediately
	Problems with clogging Dust from sanding leads to caking of the disc, thereby reducing its effect.		No clogging With Abranet, all the dust is extracted immediately.
	Pilling Pilling can produce defects in the sanding surface which show up during the subsequent coating.		No pilling This does not happen with Abranet since the dust is extracted immediately.
	Inefficient Repeated disc changes and clogging of discs mean lower efficiency.		Efficient Abranet retains its original sanding performance for a long period, which means fewer disc changes.

Back to the top